Replaces
Frequently bought together
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you taillight replacement, both if you need to replace the entire taillight, because you broke one, or if you just need to replace the bulbs. The only tools you'll need are an 8mm socket and ratchet and a flat blade screwdriver.
To replace a taillight on one of these Accords, you want to remove these little clips. They have little screwdriver heads on them. Lightly unscrew them. The middle pulls out. The rest of it pulls right out. You pull this right forward. If you're just looking to replace your bulbs, you can reach in here, twist counter clockwise, pull this back, and the bulbs just pull out, and push back in. Ok, the other one, the lower one. Also pull out, put them back in. If you're looking to replace the entire light assembly, an 8mm wrench, there's 3 nuts back here. Also, what I did, was loosened up another pin, pulled my trim back a little more.
I'm just going to fast forward as we remove those 3 10mm nuts. Once those nuts are off, the light comes right back and off. You can see this one is a little broken so we will replace it. New light from 1A Auto, exact same as the old light. I'm going to go in. These locating pins here. Make sure when you push it in, those goes go into where they should on the body. As well as making sure that the studs are going in. Now we're just going to speed up, as we put those nuts back on. You might want to push in on the light a little bit. It helps you just twist them on with your fingers a little more. You want to tighten up with a wrench. You don't want to, they don't have to be incredibly tight. You want to make sure they're nice and snug. There you go with a nice new taillight.
We hope this helps you out. Brought to you by www.1Aauto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet, and in person.
