Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the front side parking lights on this 2000 Mercury Grand Marquis. It's the same as any 1998 to 2002 Marquis. The only tools you'll need include a Phillips screwdriver, an 11mm socket, a ratchet, and socket extensions.
First, you need to remove this panel. There are two clips: one here, just turn it counterclockwise and pull it up and out; panel on this side it'll come right out. Right down in here, you've got an 11mm bolt. You'll need a socket with a ratchet and extension. You can kind of reach down with your fingers and finish getting that nut off. There's also a Phillips screw right here. Once you remove that, your parking light comes right out.
It looks like it's glued to the gasket on here. Then there are two. We can change these bulbs. Just twist counterclockwise and it comes out. And then on this one it's the same thing. Twist counterclockwise and it comes out. Both of these bulbs just pull straight out and back in.
New light from 1A Auto. It's nice, clear, and bright. Obviously a good fix if you've broken one of these in a slight accident. Also, it's a nice upgrade if your car's older and this is cloudy or faded. Every light installs just the same. It goes in, and you turn clockwise to lock it. Push your harness down in. There's a little hook right down here. You should kind of hold on to the harness. Put that stud in there and push the light into place.
Be careful on how you feed the nut down in there. Start it on my finger. Take a screw, and I'll pull out the light a little bit. Let's see here. Pull off the light, and you can see the hold where the screw goes. Push the light into place. I'm just going to fast-forward here as we tighten up the screw the rest of the way, and then we tighten up the nut on the inside. Take this panel; put it down in like that. Then put the clips in place and lock.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
