2011 Subaru Forester 3 Piece Smart Fit Floor Mat Set Armor All 79931

Hi. I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.

Hi, everyone. Sue here at 1A Auto, and today I'm going to talk about floor mats for our 2011 Ford F150. These floor mats come from 1A Auto, they are OE designed. They come right from Ford and they're a manufactured Motorcraft product. Probably a fraction of the cost of going straight to the dealer so they're direct fit for this vehicle.

The fronts have a bit of a cut out so if you have a manual shift, a four wheel drive shift on the floor there is a pre-cut. You take a razor blade and cut that off and discard it. Then this one has a push button that's electric, so it is molded and fits perfectly right in.

To put the rear mat in, it's one bit piece. It's kind of cumbersome because it's large but best way to do it is to put the back seats up and, I think I have to go to the other side, no I can get it from here. So once those back seats are up, I'll grab the one piece mat and then I can lay it right down. It's nice because it has the little rubber grips so it'll grip right into that carpet once it settles itself down from the packaging fold. That's really good because the water will run underneath the seat instead of on the carpet. It's got half of a rubber for the passengers in the back.

Once that's in, all you got to do is put your seat back down and you're ready to roll.

For the drivers side, make sure your seat is all the way back and you're going to fish it up under the pedals first. You have the two anchor dots here--they're little plastic. Push it down. This stops it from hitting the brake pedal or the gas pedal, and they lock into place. Molded right to the factory floor because they are OE floor mats from 1A Auto.

Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping and the best customer service in the industry.

All-weather floor mats are great for your vehicle, especially keeping mud and snow out of the carpets.

These are actually really easy to install. The first thing we're gonna do is take out the old ones and match them up. Just put this over the new all-weather floor mat, and just line this up. And we'll just take a marker and just make a mark where you're gonna cut. So, I'm gonna cut these off here, cut that one off. And then, on this side, I'll cut all these off.

Take some scissors or even a utility knife and just cut this right here. And, if you want to, you don't have to cut all that off first, you could try it first. Just cut a little bit off. And if you wanna trim it up some more afterwards, you can. So, we could test fit this and see how this works.

And that actually looks pretty good like that, so I could just wash that marker off. Fits really good. And underneath there's some grippers on here. You can take these grippers off, that's just gonna grip down a little bit more. This is on the passenger side. And just like that. For the backseat it's even easier, just take the new one and just slide it in position, see how that looks. And, I'll just trim this top off right here. And just slide it in position, and that looks good like that.

So that's a quick and easy upgrade to your vehicle. If you enjoyed this video, make sure you subscribe to our channel, ring that bell, turn on all notifications so you don't miss any of our videos.

What's up, guys? I'm Andy from 1A Auto. In this video, I'm going to show you how to install these floor mats in this 2010 Toyota RAV4. If you need these parts or other parts for your vehicle, click the link in the description and head over to 1aauto.com. These floor mats go in the back. There's a difference between the right side and left side. And you don't want to put them on other floor mats. There is grippers on the bottom. They grip to the carpet. This one goes right here. This one goes right here. So, the shape of this is the difference right here, and then it's a little bit longer over here. That's how the back ones go in. This is the driver's mat. Now the drivers and the passengers are different. There is two little holes right here that these hooks go into.

Now, it comes with these hooks. If your hooks are missing, then you can install these. This goes through the carpet, and then you push down on this little tab, and that's going to lock it in place. This vehicle has the hooks there, so I'm just going to reuse the old hooks. Just slide this in position. Again, you don't want to put a mat underneath here. And then slide it onto the hooks just like that. Same with this hook just like that.

Now, this last one is the passenger side. Again, you don't want to put it on another mat. It does have these little nubs to keep it from moving around, but you do not have those little tabs that hold it in place. It's not as crucial on the passenger side as it is on the driver's side. There you go.

Thanks for watching. Visit 1aauto.com. Your place for DIY auto repairs for great parts, great service, and more content.