Replaces
Replaces Chevrolet GMC Driver & Passenger Side 2 Piece Headlight Set General Motors OEM GMLHP00001
$409.95
Replaces Chevrolet GMC Molded Plastic Door Panels Accu-Form 2021 L& R
$359.95
Replaces Chevrolet GMC Fuel Tank Kit TRQ FKA67527
$333.95
Replaces Chevrolet GMC Fuel Tank Kit TRQ FKA69720
$323.95
Replaces Chevrolet Dodge GMC Front Ceramic Performance Brake Pad & Rotor Kit with Calipers TRQ Performance BKA26149
$314.95
Replaces Chevrolet GMC Fuel Tank Kit TRQ FKA67521
$313.95
Replaces Chevrolet GMC Fuel Tank Kit TRQ FKA69725
$303.95
Replaces Chevrolet GMC Front Drivetrain Kit 4 Piece Kit TRQ PSA76664
$301.95
Replaces Chevrolet Dodge GMC Front Semi-Metallic Performance Brake Pad & Rotor Kit with Calipers TRQ Performance BKA26306
$300.95
Replaces 1981-91 GMC K3500 Truck Crew Cab Complete Carpet Auto Custom Carpets 20472-160-1040000000
$289.95
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality auto replacement parts and the bets service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1AAuto. I want to help you save time and money repairing and maintaining your vehicle. I'm gonna use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, I will be replacing the tail light on this 1997 Ford Expedition, same as any '97 to '02 Expedition. Only tool you'll need is either a T20 Torx Driver or a 7 millimeter wrench.
To remove the tail light, you're going to remove these two. They're either T20 Torx ... Wrench. Okay, then once you have those out, you basically kind of pull the light away from the truck. Pull the top and then pull the bottom. Okay. Then pull the bulbs if you're looking to just service the bulbs. Okay. Twist and come out. Okay, obviously once the bulbs are out, there is your tail light. If you've got a broken tail light or something, in 1A Auto, we sell kind of the exact replacement that will mount just like the original. Obviously reinstalling is the reverse of the procedure. Okay. Twist the bulbs in. Okay. Get it lined back up with the pins going into the right locations. Okay. Then reinstall the bolts.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality auto replacement parts and the bets service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that serves you on the internet and in person.
Tools used
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service as well as replace the entire taillight assembly on this 1996 Chevy Tahoe. We show you on the driver side, but the passenger side is the same procedure. The items you'll need for this include new taillights from 1AAuto.com, a flat blade screwdriver, and a Phillips screwdriver.
Using your flat blade screwdriver, you want to pry out this cap and this cap right here. Now, you want to remove this Phillips screw and this Phillips screw. We'll just fast-forward as Don does that. Now, pull the taillight straight out and then pull back on the tab on this harness and pull it free.
Now, if you want to just service the bulbs, you just remove these two Phillips screws holding on this panel. Now, you just pull the bulb out and then push your new one in. The other two are the exact same way. If your circuit board ever breaks, we do offer exact replacements at 1AAuto.com.
To replace the bulbs, you can just put that circuit board back into place and replace those two Phillips screws. In the back is the original light; in the middle is the new light from 1AAuto. You can see in exact replacement. We also offer kind of a performance style and these styles do change from time to time. This is example of what we were offering when this video is done.
To re-install, plug it back in, put the light in place, and line up the holes, and re-install those two screws.
Replace those two caps. To give you a better idea of how they look, on the left is the new one and on the right is the old one. You can see they're identical. These just look a little bit newer. Then for the performance taillight and just a close up of it. And you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Tools used
Let's get going on replacing this tail lamp assembly. Open your tailgate. You're gonna see your mounting screw here and one right there. Remove those with a Phillips-head screwdriver. Okay. Let's get this outta here. Get your little electrical connector here. If you have a pocket screwdriver it's probably gonna come in handy. Got our brand new lens here. Looks great. We're gonna hook up our electrical connector. Just take a look. That looks awesome too. Should clip right in. Give it a tug. You got your little hooks here. You're gonna go into those holes and it's gonna roll right in, just like that. Start in both these screws and then we'll tighten them down. All right. Let's get ready to test it.
