Replaces
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you internal door handle replacement on this 2003 Honda Odyssey. It's pretty much the same for '99 to '04 Odysseys. We work on the driver's side door, but the passenger side door is the exact same, and this if for the front doors.
For the repair, you're going to need a new interior door handle from 1AAuto.com, and you'll also need a small flat blade screwdriver, and a Phillips screwdriver.
Normally, you would take a small screwdriver, and then there will be a little trap door right here that has a little slot in it, and you just kind of pry that back, and you can see that there's a Phillips screw right there. Remove the screw, slide the handle forward, and pull it out.
Looking from the top, as you pull the handle out, you can see a little clip right here. Use your screwdriver and just pry that clip. Sometimes just using your finger works as well. Pull that clip and pry it out. Then, that rod comes up and out, and then there's just your switch. You can either unplug your switch here, or you're going to transfer your switch over to your new handle anyway, so just remove the two small Phillips screws, and then your handle comes out.
Then, to reinstall the handle, just put your handle in place, start your two screws here. Let's speed it up. I put those screws in by hand first and then just tighten them up firmly. Just kind of get your handle into place, pull the rod out, and put it into the handle. Then just flip that clip around, lock it in place, put your handle back in, slide it back, and then put this screw back in place. Then push that little trap door over.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
