Created on: 2018-02-26
How to repair, install, fix, change or replace a broken, missing, warped, stripped, or damaged radiator cap on 12 Chevy Traverse
Flat Blade Screwdriver
Trim Tool Set
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Go inside the vehicle. Open up the hood. Okay. To remove this plastic shield that's in the front of the engine compartment, there are 10 clips. Take a small flat-bladed screwdriver or trim clip tool. Pop them up. To loosen them you need to go in like this. Pull them out. If the middle comes out, it's okay. Then this is, this rubber seal is clipped in here. Just kind of pop it out. Use a small flat-bladed screwdriver. Just pop it up. Use the trim clip tool. These may break when you're taking them out. You might want to have some new ones on hand. If the middle comes out, it just pushes right back in there. Just repeat that for all the clips. These ones are a little trickier, because they're deep inside here. Just try to get this in here and pry them up. Just go along and do the same for all of them. This should just lift right off now. Then we'll put it aside. With the cover removed, now you can access your radiator cap.
Install the upper cover on the engine compartment. Slide it under that ground point. It's going to go over these rubber mounts here, both sides. Let's go under this weather strip. Same thing for both sides. Reinstall all the push clips. It's easier to push the clips in if you pull out the center part. This is the last one, and that is complete. Close your hood.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Watch this video to learn how to fix your rear defrost. The experts at 1A Auto show you how to diagnose and repair the rear defrost grid panel.