Created on: 2013-10-07
Watch this 1A Auto video to learn how to replace the third brake light on your 07-13 Chevy Silverado.
Phillips Head Screwdriver
Needle nose pliers
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the bulbs in the third brake light on this 2011 Chevy Silverado 1500. We're also going to show you how to remove the entire assembly if you need to, if it gets cracked or broken. The tools you'll need for this are a Phillips screwdriver and maybe some pliers to help you turn the sockets.
Start off by removing these two Phillips screws here. Once those are out, you can just pull that third brake light out and push the tab on the harness on the back to disconnect it.
Go to replace the bulb. You just turn it, pull the bulb right out, push your new one in, and then you just turn the socket back in. It's the same for each of them.
Now you can reconnect the harness and feed that wire back up into the truck, push it into place, and then replace those two Phillips screws.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped outer tail light / brake light on 05, 06, 07, 08, 09, 10 Volkswagen Jetta.