How to Change Headlight Bulbs 2009-15 Honda Pilot
Created on: 2018-06-19
This video shows how to replace a burnt out side marker bulb, turn signal bulb, headlight bulb, high beam bulb, and the daytime running light (DRL)
-
step 1 :Replacing the Side Marker Bulb
- Reach behind the headlight
- Twist the side marker bulb socket out of the headlight
- Pull the bulb off the socket
- Push a 194 bulb onto the socket
- Twist the socket into the headlight
-
step 2 :Replacing the Turn Signal Bulb
- Twist the turn signal bulb socket out of the headlight
- Pull the bulb off the socket
- Push a 3457NAK bulb onto the socket
- Twist the socket into the headlight
-
step 3 :Replacing the Headlight Bulb
- Twist the headlight bulb socket out of the headlight
- Pull the bulb off the socket
- Push an H11 bulb onto the socket
- Twist the socket into the headlight
-
step 4 :Replacing the High Beam Bulb
- Twist the high beam socket out of the headlight
- Pull the bulb off the socket
- Push a 9005 bulb onto the socket
- Twist the socket into the headlight
-
step 5 :Replacing the Daytime Running Light Bulb
- Twist the daytime running light socket out of the headlight
- Pull the bulb off the socket
- Push a 9005 bulb onto the socket
- Twist the socket into the headlight
Hi. I'm Mike from 1AAuto. We've been selling auto parts for over 30 years!
To do the headlight bulbs, we're going to reach in down here to access the bulbs. It's a little bit tight, but you can do it. It's not easy to reach in from this side. Then on the other side, do the same: reach in right here, to be able to access the bulbs.
For this video we removed the bumper and are going to remove the assembly to show you more detail of how to replace the bulbs, but you do not have to do this just to replace the bulbs. Here's your DRL bulb, or daytime running light bulb. Here's your high beam bulb. This is your regular headlight bulb. Here's your turn signal bulb and your marker bulb is on the side.
This is your marker bulb. This bulb is a 194. This is your turn signal bulb. You pull this right out. Grab it. This bulb is a 3457NAK or a 3457 amber bulb. Push that back in. This is the headlight bulb. This bulb is a H11. When installing these with the new one, you want to make sure you do not touch this. You do not want to get the oils from your hand on the bulb or it will burn out faster.
So, we have the high beam in here. This bulb is a 9005. Next we have the DRL, or daytime running light bulb. Pull this out. Again, make sure you don't touch the bulb when installing a new one, or it will not last as long, and get the oils from your hands on it. This one is also a 9005. Push that in. Again, we did not need to remove this whole assembly to access these bulbs, but we wanted to pull it out and show you more detail of how to do it.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Ticking Clicking Noise Coming From Your Engine Diagnosing Collapsed Lifters
Andy diagnoses a top end clicking ticking noise in our Chevy Avalanche! Andy locates the clicking noise to the top driver side of the 5.3L V8 engine, and discovers an intermittent misfire in cylinder 1. After removing the valve cover, he finds a very loose rocker, the source of our noise. He determines the rocker is loose because its lifter has collapsed, meaning it's not pushing up on the rocker when activated by the camshaft. The fault is in the AFM (active fuel management) lifter.
