How to Fix a Stuck MAF Sensor Connector
Created on: 2018-06-22
How to remove, loosen, or release a stuck MAF sensor
-
step 1 :Releasing a Stuck Connector
- Spray water displacement oil on the lock of the connector
- Turn it over and spray it from the other side as well
- Use a flathead screwdriver to work the lock back and forth until it frees up
- Use compressed air to clean out the debris
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years.
This connector lock is stuck right now, so what I'm gonna do is I'm gonna take some water displacement oil and just spray it in here, loosen it up a little. I'll let that go in. Some of this is due to dirt and sand; gets in here. Some of that gets out, then it should be able to move a little easier. Spray a little bit down in here, let it soak for a minute. Try connecting it up again. There we go. It's starting to move a little bit.
I'm gonna use a little compressed air to spray in here to loosen up some of the debris. I'll get it from the front side as well. Let's see. It seems smoother. It's definitely smoother than it was.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tailgate Wont Stay Shut How to Fix a Stubborn Truck Tailgate
Andy shows you how to check out the tailgate, from the handle, to the latches, and even the latch posts, to figure out why the tailgate won't stay shut.
