How To Install Change Replace Spark Plugs 2001-06 Chrysler Sebring 2-7l
Created on: 2013-10-25
This video shows you how to change the spark plugs on your 01-06 Chrysler Sebring yourself. 1A Auto shows you how with step by step instructions!
-
step 1 :Removing the Spark Plugs
- Familiarize yourself with the location of each spark plug
- Remove the ignition coil harness
- Remove the 8mm bolts from the ignition coil
- Remove the ignition coil
- Remove the spark plug with a 5/8 ratchet and socket extension
- Use a magnet to pull the spark plug out
-
step 2 :Installing the Spark Plugs
- Set the spark plug to the correct gap size
- Insert the spark plug and tighten it with a 5/8 socket and ratchet
- Install the ignition coil pack and the 8mm bolts
- Attach the ignition coil wiring harness
Tools needed
-
Socket Extensions
Spark Plug Gapping Tool
8mm Socket
5/8 Inch Spark Plug Socket
Ratchet
Magnet - Extendable
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a spark plug on a 2004 Chrysler Sebring Sedan with the 2.7-liter V6 engine. The operation is pretty similar for all 6-cylinders. Tools you'll need include new spark plugs, 8mm socket and ratchet, 5/8 spark plug socket, an extension for that, and a spark plug gap tool. We've provided you with an engine cylinder number diagram. You can see the back side of the engine is 1, 3, and 5; the front side of the engine is 2, 4, and 6. We'll be showing you how to replace a spark plug on the front side bank of cylinders.
Go ahead and locate your ignition coil packs. That's 2, 4, 6, and on the back side, it's 1, 3, and 5 on the end right there. We're going to be replacing the spark plug in cylinder number 2, so we're going to remove the harness that goes to the ignition coil there, and then we are going to use our 8mm socket and ratchet and remove the 2 screws that hold it in place. I'll fast-forward as I do that.
Now with those screws out, you can go ahead and pull out your ignition coil. Down below the ignition coil, you'll see your spark plug. I'm using the 5/8 inch, the smaller of the 2 spark plug socket sizes with an extension and a ratchet. I'm going to be removing that. I'm going to be fast-forwarding as I do that. I'm just going to use a little magnet there to help pull that spark plug out.
This vehicle has got an emission control sticker on it right up here. It's vehicle emission control information. There, you'll see your spark plug gap size. You'll see I've got a new spark plug here and a gap tool. I'm going to take that recommended gap, set it to my new spark plug, then I'm ready to reinstall. Reinstall the new spark plug. I'll go ahead and fast-forward as I tighten that down.
Now, you can reinstall your ignition coil pack there and reinstall the two 8mm bolts that hold it in place. Using your socket and ratchet, go ahead and tighten them down.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Spark Plugs 2009-15 Toyota RAV4
Watch this video to learn how to replace the spark plugs on your 09-15 Toyota RAV4. 1A Auto shows you how to do it yourself so you can save money!
