How to Install Front Mud Flaps 2011-15 Ford F-350
Created on: 2019-05-24
These splash guards will provide added protection to the body of your 11-15 Ford F-350. They're easy to install, watch this video to find out how!
-
step 1 :Installing the Front Mud Flap
- Remove the two front facing 5.5 mm screws
- Remove the front 8 mm bolt at the rear corner of the wheel well
- Align the mud flap with the mounting holes
- Replace the 5.5 mm screws
- Replace the 8 mm bolt
Tools needed
-
Impact Screwdriver
Socket Extensions
Universal Joint
5.5mm Socket
8mm Socket
Ratchet
Hey, everyone. Sue here from 1A Auto, and today we have a 2015 F-350 in the shop. And we're putting on front mudflaps. Nice molded mudflaps from 1A Auto, even has the symbol for Ford on it. Real easy steps. Let's do it.
So it's going to sit up in here just like that. You need a 5.5 millimeter socket, and you're going to undo these two front screws here inside the fender well. You could always use turn your steering wheel if it's easier for you. I just have a little quarter inch swivel that I'm going to use. And then down below here, it's an eight millimeter socket. We're going to take this bolt out right there. And the kit comes with a replacement bolt for that. So that's really cool. Got a nice, new clean black bolt with good threads.
So you're going to just line that right up. Put the rubber part on the outside of that, and I'm just going to line that bolt up. Start it with my hand. Replace the two front fender well screws. 5.5 millimeter socket ones. Line those up. I'm going to do the small ones first, tighten those up. Going to hold the mudflap right where I want it to be.
Put my eight millimeter socket on. This is how fast and easy this job is. Done.
Thanks for watching. Visit 1Aauto.com, your place for DIY auto repairs, for great parts, great service, and more content.
How to Install Front Mud Flaps 2009-14 Ford F150
Watch this video to learn how to install the front mud flaps on your 09-14 Ford F150.
