How To Install Replace Remove Front Door Panel Nissan Altima 1998-2001 1A Auto
Created on: 2012-06-17
Watch this video to learn how to remove and replace the front interior door panel on your 98-01 Nissan Altima.
-
step 1 :Removing the Door Panel
- Pry off the trim piece at the front top corner of the door panel with a flat blade screwdriver
- Pry up the window switch panel with a flat blade screwdriver
- Disconnect the window switch wiring harnesses
- Pry off the trim piece inside the door pull with a flat blade screwdriver
- Remove the Phillips head screw inside the door pull
- Remove the door pull
- Pry off the door handle bezel with a flat blade screwdriver
- Pull the door panel up and off
-
step 2 :Reinstalling the Door Panel
- Push on the trim piece at the front top corner of the door panel
- Lift the door panel into place
- Push in the door panel clips
- Connect the window switch wiring harnesses
- Push in the switch panel
- Push in the door pull
- Insert the Phillips head screw inside the door pull
- Push in the trim piece inside the door pull
- Push in the door handle bezel
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove the front door panel on this 2000 Nissan Altima. This is pretty much the same for any 1998 to 2001 Altima. The only tools you'll need are a small flat blade screwdriver and a Phillips screwdriver.
To remove your door panel, first use a small screwdriver and carefully pry up here. Pull this corner straight off, and then you want to go under here, pry straight up firmly on your switch panel, and then turn it over. There's a button right here. Press that button and disconnect your switch panel. Use a small screwdriver, and there's just a little button, trim button, down here. Open it up and you can see there's a Phillips screw right there. I'll just fast forward as I removed that screw and then pulled that door pull cup up and out.
Okay, on this bezel you can see mine's broken already so it makes it a little easier to come off. Basically there are four tabs. You want to pry in between this back part and the tab and pull out on the bezel at the same time. Pull it off. Now grab hold and pull firm on the bottom. Lift and it will all come off.
To put the panel back on, just make sure that your harness comes up through. You lift it down at the right place against the window and push down.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Allergy Symptoms How your Car and 1A Auto Can Help
1A Auto reviews how to install a new cabin air filter and how it can positively affect your health
