How to Perform Oil Change 2015-18 Subaru WRX

1. step 1 :Draining the Oil 0:50

   • Raise the vehicle on jack stands
   • Have a drain pan ready
   • Remove the 14mm bolt from the drain
   • Twist on the 15mm drain bolt
   • Tighten the bolt with a 14mm socket and torque wrench to 31 foot-pounds
   • Clean the area with a rag

2. step 2 :Removing the Oil Filter 2:31

   • Lower the vehicle to the ground
   • Remove the oil filter with an oil filter wrench
   • Clean the area with a rag

3. step 3 :Installing the Oil Filter 3:12

   • Place a layer of oil around the rim of the oil filter
   • Twist the oil filter into place

4. step 4 :Servicing the Oil 3:37

   • Remove the oil cap
   • Place a funnel into the oil fill
   • Replace the oil to the recommended amount
   • Replace the oil cap
   • Start the vehicle
   • Let the engine run for a few seconds
   • Turn the vehicle off
   • Check the oil level with the dipstick

Tools needed

• 14mm Wrench

  Funnel

  Oil Filter Wrench

  14mm Socket

  Jack Stands

  Cloth Rags

  Floor Jack