How To Raise Support 2007-14 Chevy Suburban
Created on: 2017-06-22
How to raise and support your vehicle with a jack and jack stands on 2009 Chevy Suburban.
-
step 1 :Raising and Supporting the Front Wheels
- Place the jack underneath the frame
- Raise the vehicle with the jack
- Support the frame with jack stands
- Alternatively, place the jack under the control arm
- Raise the vehicle with the jack
- Support the frame with jack stands
- To raise both wheels, place the jack underneath the front crossmember
- Raise the vehicle with the jack
- Support the frame with jack stands
-
step 2 :Raising and Supporting the Rear Wheels
- Place the jack underneath the shock mount brackets
- Raise the vehicle with the jack
- Support the frame with jack stands
- To raise both wheels, place the jack underneath the differential housing
- Raise the vehicle with the jack
- Support the shock mount brackets with jack stands
Tools needed
-
Jack Stands
Floor Jack
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
On the Chevy Suburban 2007 to 2014 as well as the Silverados, Sierras and Yukons, to jack up a front wheel, on each side you could jack the frame here and put a safety stand nearby. You could also jack underneath the control arm and put your safety stand here.
If you wanted to lift both wheels at once, you could jack underneath the front cross member here and then put the safety stands, again, under the frame a little further back. You do not want to jack up on your axle. You do not want to jack up your transmission pan and I would prefer the front cross member. I would not jack up this rear orbital cross member.
To the rear, your spare tire jack has a little detent here that it goes in, but if you're looking to just jack up one wheel, you could jack up under this bracket. If you wanted to jack up under both wheels, you can carefully position your jack underneath the corner of the chuck of your rear end, jack it up and then you can place your jack stands just in front of the brackets on the frame here. If you wanted to support your whole rear end for any reason, again, you could jack up underneath the center and put jack stands under the shock mount brackets.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Cant Spray Your Cars Windshield Diagnose Broken Washer Nozzles
This video shows you how to diagnose clogged, broken, or leaky washer fluid nozzles and hoses.
