Created on: 2013-11-18
Watch this video to learn how to remove and replace the front interior door panel on your 02-06 Nissan Altima.
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and replace your door panel on this 2003 Nissan Altima. The only tools that you're going to need for this procedure are a Phillips screwdriver and a flat blade screwdriver.
Start off by removing this screw cap right here. Underneath that, there's a Phillips screw; you want to just go ahead and remove that. Pry up the switch panel starting at the top here. Now, disconnect the harnesses from the switch panel. Just push down on the tabs and pull the harness out. Now pry out this triangular panel at the top of the door panel and remove the screw cap from behind the door handle. Now you just want to remove these two Phillips screws. Down here is your courtesy light; it just pulls out and you can just pull out the harness. Then pull out around the door to release the clips. Then the door panel just lifts up and off. Now on the back side of the door panel, there are these two cables. They disconnect the same. Pull them out, lift it up, and it's free. Then, you just want to push on the tabs on this harness and pull it out.
Now, to reinstall your door panel it's pretty much just the reverse of the procedure. You just push your harness into place and slide your door handle and lock cable down into that slot. Push it forward and clip it into the door panel. Push the harnesses through the door panel. Then just line it up on the window sill and push it down into place, and make sure that the harness for your courtesy light comes through. Then, line up the clips on the back of the door panel and just hit them into place. Reconnect your courtesy light and push it into place. Replace the two Phillips screws: the one behind the door handle and the one in the pull cup. Reconnect your switch panel. Just plug the harnesses in and push the switch panel down into place. Replace the Phillips screw in the switch panel. Now just replace that triangular panel and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Possible causes of a screeching, squealing engine. Check out 1aauto.com for more instructional videos and auto parts to help you save time and money repairing your own vehicle.