How to Remove Front Door Panel 2002-08 Dodge Ram 1500
Created on: 2016-05-06
How to repair, install, fix, change or replace a door panel. Door panels need to be removed to access the inside components of the door, like the window regulator or exterior door handles on 08 Dodge Ram
-
step 1 :Removing the Door Panel
- Remove the 10mm bolt behind the door handle
- Remove the door handle
- Remove the #3 Phillips screw from the middle of the door panel
- Remove the #3 Phillips screw from the sail panel
- Remove the two #2 Phillips screws from the bottom of the door panel
- Lift the door panel up and off
- Disconnect the window switch wiring harnesses
-
step 2 :Reinstalling the Door Panel
- Remove the door lock bezel
- Connect the window switch wiring harness
- Insert the door panel into place
- Insert the door lock bezel into place
- Tighten the #3 Phillips screw from the middle of the door panel
- Tighten the #3 Phillips screw from the sail panel
- Tighten the two #2 Phillips screws from the bottom of the door panel
- Insert the door handle into place
- Tighten the 10mm screw to the door handle
Tools needed
-
No. 3 Phillips Screwdriver
Socket Extensions
No. 2 Phillips Screwdriver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and reinstall the front door panel on this is 2008 Dodge Ram. You'll need a 10mm socket with ratchet and extension, and #2 and #3 Phillips screwdrivers.
Remove the 10mm bolt in the inside edge of the door handle. Remove the door handle from the opening. Remove the #3 Phillips behind the door handle, and in this top corner, two #2 Phillips on the bottom of the panel. Lift up on the door panel to release. Then we'll have to disconnect the two connectors from the window switch.
Pop off the door lock bezel by pushing from the back. Reinstall your two window switch connectors. Line up the tabs in the door panel. Slide your door panel into place. Pop the door lock bezel back into place. Reinstall your four door panel screws. Hold your screw in place for the interior handle. Line it up and tighten it down.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Power Windows Not Working Check for Broken Wires
Len diagnoses a problem with the power window wiring at the door jamb.
