How to Remove Master Window Switch 2007-14 Toyota FJ Cruiser
Created on: 2019-07-03
Watch this video to learn how to replace the master power window switch on your 07-14 Toyota FJ Cruiser. 1A Auto shows you how step by step!
-
step 1 :Removing the Master Power Window Switch
- Pry the master power window switch trim panel up and remove it
- Disconnect the master power window switch electrical connector
- Remove the three Phillips screws securing the switch assembly to the trim panel
- Remove the switch assembly from the trim panel
-
step 2 :Installing the Master Power Window Switch
- Insert the switch assembly into the switch panel
- Secure the switch assembly to the panel with the three Phillips screws
- Reconnect the power window switch electrical connector
- Push the switch panel back into the door
Tools needed
-
Phillips Head Screwdriver
Trim Tool Set
Hey, friends. It's Len here, at 1A Auto. Today I'm working on a 2007 Toyota FJ Cruiser. I'm going to show you how to do a master switch in the left front door. It's going to be very simple. I want to be the guy that shows you how to do it. If you need any parts, you can always check us out at 1aauto.com. Thanks.
Okay, friends. So we've got the door open. We want to remove this plate right here. What we're going to do is use something small, like a pocket screwdriver. Just try to get it in there. Use something plastic. Lift and pull this up and out. There we are. Right here there's a little clip. There's that. Now we'll go ahead and remove the Phillips head screws right along here, and we'll take our switch right out.
We've got three Phillips head screws. We're just going to remove those. There's one. Screw number two, same as the first. I'm going to go with the assumption the third one is the same as well. Screw number three. We'll take this, lift it out. There's our front window switch assembly.
Now it's time to get this back together. We're going to take our switch unit, whether it's new or old. This one works, so we're just going to slide it back in. Get all the screw holes lined up. What I'm going to do is I'm going to start in these screws. I'm not going to tighten any of them until they're all started. This one. There we are.
Let's install it. Here we go. We're going to take our connector, slide it in. Right here, there's a little slot. Goes straight down because this is going to go in, and this clippy-do is going to hold it in right there. There we are. Installed. Let's test it. Let me grab the key. Love it. Good to go.
Thanks for watching. Visit 1aauto.com, your place for DIY auto repairs, for great parts, great service, and more content.
How To Replace Power Window Switch 2004 Jeep Liberty
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 2004 Jeep Liberty.
