Created on: 2011-08-19
How to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more to the Dodge Intrepid, years 93, 94, 95, 96, and 97.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to remove the rear inside door panel on this 1997 Dodge Intrepid, same as most '93 to '97. Only tool you'll need is a Phillips screwdriver.
Use a 10 millimeter wrench to loosen your negative battery cable and to remove it. Obviously you will want to reconnect it at the end of the repair. It's pretty easy to remove the door panel. There are four screws: one here on the back, one down here in the door pull, one right in behind the door handle, and then one right here in the front. Remove those. Okay, we'll fast-forward here as we remove those screws. The screws are removed. Pull the top of the panel out. Lift up. Pull this out a little bit. Lift up. Take it off. Once you get the door apart, there will be two things. There is a clip here, and this wad comes off of your door handle. Then over here there is a connector for your courtesy light, just pry in that. There's a little tab right there. I pried that out with my finger. Disconnect the connector, then pull this off of the door. Then your door panel is still connected with the harness there, but you can lay it down out of the way and do any work that you need to do.
To reinstall your door panel, there are three tabs at the bottom. You start those into the slots. The door handle can just rest there. Over here, bring this back up, connect it. Put this clip back in. Bring the door panel closer. Connect our door handle. Make sure your door lock is in place. Hold the door panel up some. Push it against the door. Make sure the top goes in correctly. Make sure it's flush all the way around. Now we can reinstall our screws. We'll fast-forward to reinstall those screws. You want to tighten them firm. Don't over tighten them though, you'll end up stripping them, and they won't hold anything well.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.