How To Remove Rear Door Panel 1996-2000 Honda Civic
Created on: 2013-12-23
Learn how to remove the rear door panel to access parts like the interior door handle, window regulator, and door latch with this how-to video
-
step 1 :Removing the Door Panel
- Pry off the pull handle trim piece with a flat blade screwdriver
- Remove the two Phillips screws in the door pull
- Remove the Phillips screw in the door handle
- Disconnect the wiring harness in the door pull
- Pry back the door handle and disconnect the latch cables
- Pry out around the door panel
- Lift the door panel up and off
-
step 2 :Reinstalling the Door Panel
- Lift the door panel into place
- Push in the door panel clips
- Connect the wiring harness in the door pull
- Connect the latch cables to the door handle
- Push the door handle in place
- Insert the Phillips screw into the door handle
- Insert the two Phillips screws into the door pull
- Push on the door pull trim piece
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and replace the rear door panel on this 1998 Honda Civic. The only tools you're going to need for this is a flat blade screwdriver and a Phillips screwdriver.
Start off by prying off your pull handle panel. Behind here there are two Phillips screws: one here and one here. You want to remove this Phillips screw up here as well. We'll just fast-forward as Don removes those. Now disconnect this harness by just pushing on the tab and pulling it out. Then pull back on your door handle and it pulls out. You just want to pry this clip off your door handle rod and then push your door handle down and out. Now pry out around the edges of your door handle to release the clips. Then your door handle just lifts up and off.
To replace your door panel, just lift it up onto the window sill, push it down over the lock, and then into place. Now just hit in the clips around the edges, reconnect your harness, put the door handle rod down into the hole on the door handle, and then push that clip back onto the rod. Push your door handle into place and then slide it back. Now we'll fast-forward as Don replaces those three Phillips screws. Snap your door pull handle panel back into place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Remove Front Door Panel 1997-2005 Lexus GS300
Instructions:- step : Removing the Door Panel
- step : Installing the Door Panel
