How to Remove Rear Door Panel 2005-10 Chrysler 300

Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.

In this video we're gonna be working with our 2006 Chrysler 300. We're gonna show you how to remove and replace your vehicle's rear interior door handle.

If you like this video, please click subscribe; we've got a ton more information on this and many other vehicles. If you ever need parts for your car, you can follow the link down in the description over to 1AAuto.com.

Here are the items you'll need for this repair: T20 Torx socket, 1AAuto Trim Removal Kit, Phillips head screwdriver

The four plastic push pins on your door, there're three on the outside edge here, and one on the inside edge, all you have to do to remove these is pop the centers in. You can use a screwdriver to do that and you don't have to knock them all the way through like that, you can just pop them in. Use one of your 1A Auto trim tools to get behind it and pry the clips out. So there are four Phillips head screws along the bottom of the door panel and one up in the corner here in that four. There's a little tab under the door handle that you have to pry down with a trim tool and there's another Phillips head screw in there. Our piece of trim is missing but you'll normally have to pop down a little trim flap here to access that Phillips head screw.

Once you've got everything exposed, you can go ahead and remove all of those with a Phillips head screwdriver. Once you've got all your screws off, you may not even need your trim tool, pull the panel out and release all the clips, then slide it up and off the door lock. Pop the tab over for the latch rod on your door handle, rotate it out of the way and slide the latch rod out of the pole. You can then reach the connector for the rear window switch and unplug it and remove your door panel from the vehicle. Using a T20 Torx screwdriver, remove these three screws from the back of your interior door handle. Now push in the tabs. It may help to have a trim tool here. Push in and release them from the plastic. Work them out however you can.

Reinstall your interior door handle. Make sure you line up the tabs and reengage them. Reinstall your three T20 Torx screws. Reconnect your window switch and your latch. Remember the rod goes in, clasp snaps over it. Make sure that the lock slides back through the panel in the appropriate place. Line up your panel, snap the plastic clips back in. Reinstall your four plastic push clips. Reinstall the four Phillips head screws along the bottom edge of your door panel, the one hidden under the handle, and the other one hidden behind your door handle, and you're good to go.

Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.