How To Remove Rear Door Panels 2007-13 Chevy Silverado
Created on: 2014-03-03
Learn how to replace the rear door panel on your 07-13 Chevy Silverado with this video from 1A Auto.
-
step 1 :Removing the Door Panel
- Pry off the trim piece inside the door pull with a flat blade screwdriver
- Pry off the trim piece inside the door handle with a flat blade screwdriver
- Remove the two 10mm bolts inside the door pull
- Remove the 10mm bolt inside the door handle
- Pry out the upper panels by hand
- Remove the upper door handles
- Pry out the door panel by hand
- Lift the door panel up and off
- Disconnect the window switch wiring harness
- Disconnect the latch cables from the door handle
-
step 2 :Reinstalling the Door Panel
- Connect the latch cables to the door handle
- Connect the window switch wiring harness
- Lift the door panel into place
- Push in the door panel clips
- Lift the upper panels into place
- Push in the door panel clips
- Insert the 10mm bolt inside the door handle
- Insert the two 10mm bolts inside the door pull
- Push in the trim piece inside the door handle
- Push on the trim piece inside the door pull
Tools needed
-
Flat Blade Screwdriver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and replace the rear door panel on this 2011 Chevy Silverado 1500 with the extended cab. We show you on the passenger side, but the driver side is the same procedure. The only tools that you're going to need for this include a flat blade screwdriver and a 10mm socket and ratchet.
Start off by prying up this panel behind the pole handle, and then pry out this little panel beyond your door handle. Now, you want to remove this 10mm bolt and these two 10mm bolts right here. We'll fast-forward as Don does this. Now pry off this panel. It just pulls right out.
Then you want to do the same thing to the panel on the other side. Just pull out the clips on the back. Now reach in behind your door panel and just pull out to release the clips. You want to do this all the way around the door panel. Once it's free, you want to just lift it up and out of that window sill. On the back of your door panel, you want to push the tab on that harness and pull it free. Then pull this cable up and out.
Now, to reconnect your door panel, re-clip this cable and then pull out on it and pull it up. Then push it down into place and then reconnect your harness. If your switch panel pops out when you do this, just push it back down. Now, you want to put your door panel back down into the window sill and make sure that those clips line up with the holes on the door. Then just hit them back into place. Now push those two upper panels up into place. Just hit them in to activate those clips. We'll fast-forward as Don replaces those three 10mm bolts. Now replace the small panel behind your door handle and the larger panel underneath your pole handle. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Bucking or Hard Shifts Learn Transmission Symptoms on Your Car or Truck
If you have an older automatic transmission vehicle, and it's starting to feel funny, this video is for you!
