How To Replace 3rd Brake Light Bulbs 2000-07 Ford Focus 4 Door

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we show you how to replace and service your third brake light on this 2005 Ford Focus. The only tool that you're going to need for this is a flat blade screwdriver.

Open up your trunk and on the back of your third brake light you'll see these two clips. Using a flat blade screwdriver pry out the center and pull it free. Then pull out the bottom part and that third brake light should pop free. Now, you want to disconnect this harness. Push the tab and pull it free.

To access your bulbs, you want to push in on these metal tabs and pull up on the plastic part. Do the same thing on this side, and for any bulbs left behind just pull them out and push them back into place. If you want to replace a bulb you just pull it out, push the new one in and then line up this light bracket and push it back into the third brake light assembly. Making sure all those tabs are reconnected, replace your harness. Push the third brake light back up in place and replace the bottom part of the clip and then the center. Do the same thing on the other side and you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.