How to Replace Battery Hold Down 1989-2008 Ford Ranger
Created on: 2016-09-09
New Battery Hold Down from 1AAuto.com How to locate and remove your battery on 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08 GMC Acadia
-
step 1 :Removing the Battery Hold Down
- Remove the 8mm bolt
- Remove the battery hold down from the tray
-
step 2 :Installing the Battery Hold Down
- Insert the battery hold down into the tray
- Tighten the 8mm bolt to the battery hold down
Tools needed
-
Socket Extensions
8mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
A battery hold down, while it may seem like a minor detail, is very important in making sure that your battery doesn't rattle around and risk cracking. This will allow the battery acid out, which is what allows it to store its power.
If your battery hold down is missing or broken, you can replace it with a new part from 1AAuto.
You just need an 8 millimeter socket, ratchet and extension.
Remove the bolt. Remove the battery hold down and bolt from the batter tray.
Here, we have our old battery hold down that we removed from our vehicle and our new part from 1AAuto.com. While there's nothing wrong with our old part, these are very easy to damage or crack, as well as the bolts breaking off in the trey.
Once you've gotten your old damaged parts out, this new part from 1AAuto is the exact same size and shape, has the same channels and the same notch to hold your battery down in place, and keep it from rattling around and cracking the case, causing a dangerous mess, as well as a failed battery and some other expensive repairs. If your old battery hold down is missing or broken, this new part from 1A Auto is going to go in direct fit just like your original equipment and fix you upright.
Reinstall the battery hold down with these two channels lined up with the grooves on the outside edge of the battery tray. Line up your bolt and tighten it down with an 8 millimeter socket, ratchet and extension. Make sure that your battery is secure in there, and you're good to go.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Shop Products
1997-04 Ford Mustang 2 Piece Battery Tray Kit DIY Solutions BDS00033
Part Details:
- Plastic
- Black
- 2 Piece
- (1) Battery Tray
- (1) Battery Hold Down
How to Replace Battery 2008-12 Ford Escape
Watch this video to learn how you can replace the worn out battery on your 08-12 Ford Escape. 1A Auto shows you how!
