How to Replace Blower Motor Resistor 1997-2003 Ford F-150
Created on: 2017-06-29
The blower motor resistor can be changed quickly and easily. Watch this video and find out how
-
step 1 :Removing the Blower Motor Resistor
- Remove the screws from the panel
- Pull out the panel
- Disconnect the motor resistor wiring harness
- Remove the two 8mm bolts from the blower motor resistor
-
step 2 :Installing the Blower Motor Resistor
- Insert the blower motor into place
- Tighten the two 8mm bolts to the blower motor resistor
- Connect the wiring harness
- Press the lower panel into place
- Tighten the two screws to the lower panel
Tools needed
-
8mm Socket
Ratchet
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
The blower motor resistor is on the passenger side up underneath the glovebox. There's usually a trim panel that goes under here. It attaches via the plugs here and here, or bolts in, so you would pull those plugs out and then pull the panel down.
You just follow this wire right up, and there is a tab on the connector right there. Push that tab and pull down. Then two bolts hold it in place: one on each side. One there, and I'm going to block it, but one on the other side. Remove those two 8 millimeter bolts.
When you go to reinstall, you have your two holes where the bolts go, and then there's a locating hole in one of the corners. That goes towards the driver's side of the vehicle. Just put it up into place. Then start the bolts into place. Plug back in your lead.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Shop Products
Ford Lincoln Front HVAC Blower Motor Kit TRQ HMA80234
Part Details:
- Highest Quality Materials
- (1) Heater Blower Motor
- (1) Heater Blower Motor Resistor
- Quality Tested - built to a strict level of product standards.
Top 5 Problems Ford E-250 Van 4th Generation 1992 - Present
This video discusses the top problems with the 4th generation Ford E series van, model years 1992 to present.
