1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

How to Replace Blower Motor Resistor 2000-07 Ford Focus

Created on: 2014-01-31

This video shows you how to replace the blower motor resistor, or fan speed controller, on your 00-07 Ford Focus. Watch to learn how to do it yourself!

  1. step 1 :Removing the Blower Motor Resistor
    • Open the glove box
    • Push in the sides of the glove box and pull it down
    • Disconnect the resistor wiring harness
    • Remove the 8mm bolt from the resistor
    • Pull out the resistor
  2. step 2 :Installing the New Blower Motor Resistor
    • Put the new resistor into place
    • Insert the 8mm bolt into the new resistor
    • Connect the resistor wiring harness
    • Lift up the glove box, push in the sides, and push it in
    • Close the glove box

Tools needed

  • 8mm Socket

    Ratchet

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video we're going to show you how to replace your blower motor resistor on this 2005 Ford Focus. It's the same part and process on these vehicles from 2000 to 2007. The items you'll need for this are a new blower motor resistor from 1AAuto.com and an 8mm socket and ratchet.

Open your glove box, and on other side there are tabs. Just push in the sides of the glove box and pull it down. Your blower motor resistor's located right here. There's a harness connected to it. Push the tab on the bottom of the harness and pull the harness free. Next, you want to remove the 8mm bolt at the bottom of the resistor. We'll just fast forward as Don removes that. Once the bolt's removed your resistor just pulls out.

On the left, is the old one. On the right, is the new one from 1A Auto. You can see they're identical and they're going to mount exactly the same. Push your new resistor into place and then twist in, by hand, that 8mm bolt. Then tighten it up with your socket and ratchet. Next, reconnect your harness. Then, push in the sides of your glove box and close it, and you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

2000 - 2007  Ford  Focus
2010 - 2013  Ford  Transit Connect
1997 - 2000  Ford  Contour
1999 - 2002  Mercury  Cougar
1997 - 2000  Mercury  Mystique

Heater Blower Motor & Resistor Kit

Ford Focus Transit Connect HVAC Blower Motor Kit TRQ HMA80238

Part Details:
  • Highest Quality Materials
  • (1) Heater Blower Motor
  • (1) Heater Blower Motor Resistor
  • Quality Tested - built to a strict level of product standards.
$79.95

How to Replace Blower Motor Resistor 1996-2004 Nissan Pathfinder

How to repair, install, fix, change or replace a bad or broken blower motor fan speed resistor on 96, 97, 98, 99, 00, 01, 02, 03, 04 Nissan Pathfinder

Share on:
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.