How to Replace Blower Motor Resistor 2005-16 Ford Mustang

One of the first things I'm gonna do is I'm gonna take out this glovebox right here. If you were to look right underneath, you're gonna see four mounting bolts. I'm gonna remove those. Grab the glovebox. Be careful because it might wanna fall down. Grab those sides and pull it right out.

At this point, you have a clear view of where your blower motor resistor is. I'm gonna grab onto this little button, squeeze it, and then draw this down. I always take a peek inside, make sure I don't see any funny colors. This one actually looks really good, so I'm gonna continue on by removing the two mounting bolts, using an 8-millimeter. There it is. Awesome.

Let's get ready to install our new resistor. Should slide right in. We've got our two screws. Now I'm gonna carefully tighten these up, just till they bottom out. Okay. They're both bottomed out. Just gonna give them a teeny bit more. There it is. Grab that wiring harness. Click it in. Give it a tug. Now you would just test your blower motor and make sure it works on all speeds. Oh, yeah. Perfect.

Let's get our glovebox back in here. First put up one side. Put up the other side. I'm just gonna latch it in. That's gonna hold it for me. Now we'll come like this. We're gonna screw in all of our mounting screws down along here. Snug them up. Awesome.