How To Replace Bumper Step Cover 1997-2004 Ford F150
Created on: 2017-06-28
New Bumper Step Pad from 1AAuto.com How to install a bumper step cover on 98 Ford F150 pickup truck.
-
step 1 :Removing the Bumper Step Cover
- Pull out around the cover
- If the cover will not remove, remove the license plate
- Clamp the tabs on the step cover to remove it
-
step 2 :Installing the Bumper Step Cover
- Press the cover into place
- Use a non-marring mallet to press the cover into the bumper
Tools needed
-
Rubber Mallet
Pry Bar
Needle nose pliers
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
Here is your step pad. It can get wiped out by a trailer. Sometimes they just get broken. If you want to remove it, just pull firmly if it's not already broken. I've got my new one here. If it's not coming off, remove your license plate. Then you can reach right in, squeeze these tabs, and that should help you get it off. If you're not patient enough with the plier method, you can always just use a crowbar and pull the old one off.
Here's our old one. It's actually in pretty acceptable shape. New one from 1A Auto, it's an exact replacement. It's going to go on, look a lot nicer, and go right in to the same slots as the original. Just going to use a non-marring mallet here. We'll use the end of the mallet and then just a rubber mallet to drive it in the rest of the way.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Shop Products
How to Remove Bumper Cover 2007-10 Hyundai Elantra
Check out this video to learn how to replace the bumper cover on your 07-10 Hyundai Elantra. 1A Auto will show you the steps.
