How to Replace Coolant Temperature SenderSwitch 1988-2000 Honda Civic
Created on: 2013-12-18
Watch this video to learn how to replace the coolant temperature sensor on your 88-00 Honda Civic. 1A Auto shows you with step by step instructions
-
step 1 :Draining the Coolant
- Have a drain pan ready
- Twist the drain plug open
- Remove the radiator cap
- Allow the coolant to drain
- Tighten the drain plug
-
step 2 :Removing the Coolant Temperature Sensor
- Loosen the radiator hose clamp with needle nose pliers
- Pull off the hose
- Disconnect the temperature sensor wiring harness
- Remove the sensor with a 24mm socket and ratchet
-
step 3 :Installing the New Coolant Temperature Sensor
- Thread the new temperature sensor into place
- Tighten the sensor with the 24mm socket and ratchet
- Clean the house mounting area with an emery cloth
- Connect the temperature sensor wiring harness
- Connect the radiator hose
- Slide the hose clamp into place with needle nose pliers
-
step 4 :Refilling the Coolant
- Add coolant to the radiator
- Twist on the radiator cap
- Run the engine briefly
- Twist the cap off the coolant bottle
- Fill the bottle halfway with coolant, using a funnel
- Twist on the coolant bottle cap
- Drive the car briefly
- Add coolant as necessary
Tools needed
-
24mm Socket
Flat Blade Screwdriver
Drain Pan
Ratchet
Cloth Rags
Needle nose pliers
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the coolant temperature sensor on this 1998 Honda Civic with the 1.6 liter four-cylinder engine. It's the same part and process on these Civics from 1992 to 1999. The items you'll need for this are a new coolant temperature sensor from 1AAuto.com, a flat blade screwdriver, pliers, 24 millimeter socket and ratchet, a drip pan, a funnel, and coolant.
To start off, you're going to want to drain your coolant. Right here is the drain plug. Put a drip pan underneath it and just twist that switch. You'll see the coolant start to trickle out. Now remove the radiator cap and that coolant will start pouring out quicker. Tighten up your drain.
Right here, on this clamp, you just want to push these two teeth together with a pair of pliers and just pull that clamp back. Now, you can just move the hose back and forth until it comes off. This harness, right here, plugs into your coolant temperature sensor. To disconnect it, you just need to push down the tab and pull it out. You can use a flat blade screwdriver or pliers to help you out with this. With a 24 millimeter socket, put it down over the spot that you just disconnected the harness from. That's actually your sensor. We just want to loosen it until it comes out.
In the back, is the old part. Up front, is the new one from 1A Auto. You can see they're identical and they're going to mount exactly the same. Twist your new coolant temperature sensor down into place and tighten it up with your 24 millimeter socket and reconnect. Use an emery cloth or something similar to just clean off where that hose connects. Plug in your harness onto the coolant temperature sensor and replace that hose. Using a pair of pliers, slide that clip back up into place.
Next, just replace your coolant. Now, replace your radiator cap and start your car for a while and then turn it off. Open up your reservoir bottle and then fill your reservoir about halfway up. Then drive your vehicle a little bit, just check the coolant often and fill it to the proper level. We hope this video helps you out.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How To Replace Coolant Temp Sensor 1992-99 GMC K1500
Watch this video to learn how to install a new coolant temperature sensor on your 1988-2002 GMC Sierra.
