1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

installation video player icon

How to Replace Corner Light 1993-97 Ford Ranger

Created on: 2011-10-12

Find out how to replace the parking lights and service the bulbs on the 93-97 Ford Ranger yourself with our expert's steps in this how-to video

  1. step 1 :Removing the Parking Light
    • Remove the 11mm nut from the parking light
    • Pull out the parking light
    • Disconnect the wiring harness
  2. step 2 :Servicing the Bulb
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step 3 :Installing the Parking Light
    • Connect the wiring harness
    • Line up the studs on the parking light with the holes on the vehicle
    • Tighten the 10mm bolt to the parking light

Tools needed

  • Ratchet

    11mm Wrench

    11mm Socket

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

In this video we're going to show you hot to replace the side parking light. It's the orange light right next to the headlight on any '93-'97 Ranger. The only tool you'll need is an 11mm wrench or a socket with a ratchet.

You want to remove the parking light which involves moving an 11mm nut right there. An 11mm socket with a ratchet or a wrench works fine as well. Now, put your fingers in behind here and it's held in by just a couple of pins that have to push through. Feed the wiring harness out. Here's the signal light.

If you're looking to just change this bulb, turn it counterclockwise, pull it out. The bulb just pulls out and pushes in. Here's a nice new light from 1A Auto. If you had some minor damage or whatever, you're going to go in and replace, just like the original. You can see we've put in some new trim and a new headlight. What you're probably going to want to do is unplug the bulb from the harness and then put it in and re-plug in the bulb.

This and this line up with little clips. You can just kind of peek in, get one of them in. You might need to push the harness back in a little bit to get the other one in. Make sure that your stud up here is lined up. Push it right back in. Put your 11mm nut back on.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

1993 - 1997  Ford  Ranger
1995 - 1997  Ford  Ranger
1993 - 1994  Ford  Ranger
Share on:
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.