How to Replace Corner Light 2001-05 Ford Ranger
Created on: 2010-07-27
Check out this video to learn how to replace both the corner light bulbs and assembly on your 01-05 Ford Ranger.
-
step 1 :Removing the Headlight
- Pull up the two headlight tabs
- Pull the headlight forward
- Pull off the headlight bulb connector
- Twist out the signal light bulb
-
step 2 :Removing the Parking Light
- Remove the two 6mm bolts from the parking light
- Pull the parking light off its pin
- Twist out the parking light bulb
-
step 3 :Installing the New Parking Light
- Twist in the parking light bulb
- Push the new parking light onto its clip
- Insert the two 6mm bolts into the parking light
-
step 4 :Reinstalling the Headlight
- Twist the signal light bulb into the headlight
- Connect the headlight wiring connector
- Push the headlight into place using the adjuster bolts
- Hold the headlight in place as you push in the two headlight tabs
Tools needed
-
6mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.
In this video we will replace the parking light on this 2004 Ford Ranger, the same as any '01 to '07 Ranger. You start out by, to get to the park lights, you remove the head lights. There are 2 tabs that you pull up on right back here. Once you have those tabs up, just pull your light forward. Here's the bulb. You can access the bulb easily. Pull this connector off. Then, your turn signal bulb, you twist, and it comes out, and your light is out.
Once you have your headlight out, remove those two 6 mm bolts. It has a little pin that holds it in right there. You can twist and remove that.
Here's our original light. Here's our new light from 1A Auto. You can see they're exactly the same. If you're looking to freshen your lights up, to freshen your truck up, it will do well, all of those scratches. Obviously, if you get in a little skirmish, with a rock, or a little bit of a fender bender, it takes out your marker light, this is a perfect replacement. All the mounting points are the same, and it's going to go in there exactly the same.
Obviously, to put it back on is the reversal of the procedure. Put your light in. Twist. Set it in. Put in the 6mm bolts.
Installing is the reverse of the procedure. Put your signal in first, turn and lock. Plug your light bulb in. Then carefully place it back in there. I'm kind of looking down to make sure all the adjusters are going to their holes properly. This middle one, here, is a little bit off. There we go. So, down there, just make sure that is all the way through. On this side, make sure that one there, and the one down below, which is hard to see. Just make sure those are all the way in. Push in real good. Push down on your tabs. You can see this one's not in very well. Pull back up. Push down. Now, it's in nice and secure.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
Ford Ranger 6 Piece Lighting Kit DIY Solutions LHT04322
Part Details:
- (2) Tail Lights
- Features and Benefits
- 6 Piece
- (2) Corner Lights
- (2) Headlight Assemblies
How To Replace Parking Light 1992-98 Chevy Suburban
How to repair, install, fix, change or replace a broken, damaged, cracked, faded, cloudy, or chipped signal light or parking light. This procedure is the same for most 92, 93, 94, 95, 96, 97, or 98 Chevy Silverado and GMC Sierra Pickup Trucks, plus Suburban, Tahoe, and Yukon.
