How to Replace Dome Map Light Bulbs 1998-2003 Ford Ranger

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to be working with our 2001 Ford Ranger. We're going to show you how to remove the dome light cover so you can get in there and replace the bulbs.

If you like this video, please click subscribe. We have a ton more information on this truck, as well as many other makes and models. If you need any parts for your vehicle, please follow the link in the description and check out 1AAuto.com.

The only items you'll need for this repair are some new bulbs and a small flat-blade screwdriver.

Locate the small tab in the back of the lens cover on the dome light. We'll insert our small flat-blade screwdriver. Pry down to release the clips; push forward, and remove the lens.

The side map-light bulbs simply pull toward you. Simply line up the new bulb, and press it into its socket.

The center bulb here, use the small flat-blade screwdriver and pry down on the center bulb to remove it from its tabs. Line up your new bulb and press it into its retainers.

Open your door to ensure that all the bulbs are functioning properly. Install the two larger tabs into the holes in the front. Press the back into place.

Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.