How to Replace Driver Power Window Switch 2001 Ford Ranger
Created on: 2016-10-07
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 01 Ford Ranger
-
step 1 :Removing the Driver Power Window Switch
- Remove the two Phillips head screws in the door pull
- Pull the door handle panel out
- Remove the two Phillips head screws from the window switch
- Disconnect the wiring harness with a small flat blade screwdriver
- Press the metal tabs and push the switch through the panel
-
step 2 :Installing the Driver Power Window Switch
- Insert the window switch into the panel
- Connect the wiring harness
- Tighten the two Phillips head screws
- Press the door handle panel into place
- Tighten the two Phillips head screws to the door pull
Tools needed
-
Flat Blade Screwdriver
Phillips Head Screwdriver
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2001 Ford Ranger.
We're going to show you how to remove and replace the driver's master window switch.
If you like this video, please click Subscribe. We have a ton more information on this truck, as well as many other makes and models. If you ever need parts for your vehicle, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair: Phillips screwdriver, and a flat blade screwdriver.
Open your door. Remove the two Phillips head screws below the door handle. Open the door handle and release this panel from the door.
To remove your power window switch from this panel, we'll remove these two Phillips head screws. Once the screws are disconnected, use a small flat blade screwdriver to pry up and remove the connector. Then push down on the metal tabs. Push the switch through the panel. You may have to use the flat blade. Push them down one at a time and start them through before you can fully remove it.
To reinstall your switch or install a new switch, we'll line up the switch with the opening. Push down until it clicks. Reconnect the connector at the bottom and reinstall our two Phillips head screws.
Line up this panel into your door. Snap the clips back into place and reinstall the 2 Phillips head screws under the door handle.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
How to Choose Single Core and Double Core Radiators
1A Auto shows you the difference between single core and double core radiators, and helps you choose what radiator to get
