1A Auto Video Library
Our how-to videos have helped repair over 100 million vehicles.
Enter Vehicle Year Make Model

Specify your vehicle's year, make and model to guarantee fit.

installation video player icon

How to Replace Exterior Door Handle 1982-92 Chevy Camaro

Created on: 2011-07-18

This video shows how to remove and install the door panel and the exterior door handle on the 82-92 Chevy Camaro. Follow the steps in this video to DIY

  1. step 1 :Removing the Door Panel
    • Remove the bolts from the door pull
    • Pull off the door pull
    • Remove the bolts from the door handle bezel
    • Pry off the window switch with a flat blade screwdriver
    • Disconnect the window switch wiring harness
    • Pry off the door lock switch with a flat blade screwdriver
    • Disconnect the door lock switch wiring harness
    • Pry off the door handle with a flat blade screwdriver
    • Pull off the door handle bezel
    • Pull off the trim piece behind the door handle
    • Pry off the door panel with a putty knife or a door panel removal tool
    • Pull off the window seal
    • Carefully peel back the watershield
    • For more detailed instructions, please see the 1986 Camaro door panel replacement video
  2. step 2 :Removing the Outside Door Handle
    • Unclip the latch rod from the door handle by hand
    • Remove the two 7/16 inch nuts from the door handle
    • Pull the door handle out from the outside of the door
  3. step 3 :Installing the New Outside Door Handle
    • Clean the door handle mounting area
    • Put the new handle into the door from the outside
    • Push the handle into the door as you fasten the two speed nuts onto the door handle
    • Clip the latch rod onto the door handle
    • Connect the window switch wiring harness
    • Turn the ignition on
    • Lower the window with the switch
    • Test that the new door handle works
    • Turn the ignition off
    • Disconnect the window switch wiring harness
  4. step 4 :Reinstalling the Door Panel
    • Put the watershield into place
    • Hang the door panel in place
    • Push in the door panel clips
    • Put on the window seal
    • Put on the trim piece behind the door handle
    • Push on the door handle bezel
    • Push on the door handle
    • Connect the door lock wiring harness
    • Push in the door lock switch
    • Connect the window switch wiring harness
    • Push in the window switch
    • Insert the bolts into the door handle bezel
    • Put the door pull into place
    • Insert the bolts into the door pull
    • For more detailed instructions, please see the 1986 Camaro door panel replacement video

Tools needed

  • 7/16 Inch Wrench

    T10 Torx Driver

    Flat Blade Screwdriver

    Putty Knife

    8mm Wrench

    8mm Socket

    10mm Wrench

    10mm Socket

    Door Panel Removal Tool

    Ratchet

    Cloth Rags

    T25 Torx Driver

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.

In this video, we're going to show you how to replace the door handle in this 1986 IROC-Z. This door handle fits a lot of different GM vehicles from the late 70's to early 90's. A lot of them either break totally or, on this vehicle, the spring is broken so the handle can rattle around and make a bunch of noise. The tools you'll need, and these tools will vary from vehicle to vehicle . most of the tools are necessary just to get the door panel off . are T27 and T10 Torx drivers, medium and small size flat blade screwdrivers, 8mm and 10mm wrenches or socket and ratchet and a door panel clip tool or a putty knife.

On our car, the door handle is not broken, but its very rattling. Anybody who knows these cars, knows you don't need any more rattles and squeaks than what's already designed into them. Here I'm going to actually speed through taking the door panel apart. If you want to see this in regular speed, if you haven't watched our other video already, just check out our other video for the Camaro door panel removal. You can see this in a regular speed but you can probably figure enough out just by watching this.

With your door panel off, you can see up in here. Here's your handle and the two nuts you need to remove and the clip that's on the latch rod. The first thing you want to do is to reach up in here. You'll feel two nuts to hold it and then the clip. I'm just going to use my hand. Pull that clip off and move that rod to the side. Now, my handle really flops around. The nuts on the back of the handle are 7/16 inch. I'm going to need a 7/16 inch wrench. I'm going to go for the one that's behind the glass first. I use one hand to guide the wrench onto the nut. Here's one of them. Here's the other one. Now, you see the handle comes right up and out and you can see the spring is gone.

Even though we know our car needs a whole lot more than just replacing a door handle, just do a quick wash before you put the new one on. Get all the dirt off. Here's a new handle from 1A Auto. It has a good spring intact. Right in, get it in place. So, these nuts are called speed nuts. They actually cut a groove themselves. You have to basically hold your handle with one hand. Pull up with the first one on, and then, basically, you use your wrench, and push on the nut somewhat, and turn it at the same time. Get that one started. What I'm going to do with this one, after trying unsuccessfully, is put it on the wrench. Get it in place, and bring my wrench way back, and then push on the wrench. Start it, and now I'm tightening both of them. We'll just speed it up here as I tighten those two nuts up. Now you want to reach in here, and make sure you flip the clip down. Put the rod in. I'm doing this pretty much all by feel. The new handle clips in place. Now, here I'm just going to try the key on. Put the window down for a test. You want to make sure that if you didn't put something together quite right that you can get the door back open. Now, at this point, with your new door handle on there and it's not rattling. It's working correctly. Then you would want to reinstall the door panel just by reversing the procedure that you saw earlier, or, if you want, see our video for door panel installation.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.

1982 - 1992  Chevrolet  Camaro
1982 - 1992  Pontiac  Firebird
1985 - 1991  Pontiac  Grand Am
1982 - 1990  Chevrolet  Celebrity
1982 - 1990  Chevrolet  Cavalier
1982 - 1991  Pontiac  6000
1986 - 1991  Buick  Skylark
1985 - 1991  Oldsmobile  Calais
1985 - 1989  Pontiac  Sunbird
1982 - 1984  Pontiac  J2000
1982 - 1989  Buick  Skyhawk
1982 - 1996  Buick  Century
1982 - 1988  Cadillac  Cimarron
1986 - 1989  Oldsmobile  Toronado
1982 - 1988  Oldsmobile  Firenza
1982 - 1996  Oldsmobile  Cutlass Ciera
1985 - 1991  Oldsmobile  Cutlass Calais
1986 - 1987  Buick  Somerset
1985 - 1985  Buick  Somerset Regal
1984 - 1988  Pontiac  Fiero
1985 - 1987  Oldsmobile  Calais
1985 - 1994  Pontiac  Sunbird
1982 - 1982  Pontiac  J2000
1982 - 1991  Buick  Century
1982 - 1994  Chevrolet  Cavalier

1982-92 Chevy Camaro Exterior Door Handle Pair

Driver & Passenger Side 2 Piece Exterior Door Handle Set TRQ DHA37120

Part Details:

  • 2 Piece
  • Black
  • (1) Driver Side Exterior Door Handle
  • (1) Passenger Side Exterior Door Handle
$39.95
recommended video

How To Replace Front Exterior Door Handle 1998-2011 Lincoln Town Car

How to repair, install, fix, change or replace a broken or snapped off exterior door handleon 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, and 11 Lincoln Town Car models.

Share on:
Go To Top

Same Day Shipping

Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos to guide you step-by-step through your repair.