How to Replace Four Wheel Drive Switch 2002-06 GMC Envoy XL

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the four-wheel drive switch on the 2003 GMC Envoy XL. It's the same part and similar process on the regular Envoy's from 2002 to 2009. The items you'll need for this include a new four-wheel drive switch from 1AAuto.com and a flat blade screwdriver.

Using a flat blade screwdriver, just carefully pry out the top of this panel. Then reach back behind it and pry out. Then just push the tabs on either side of your four-wheel drive switch and push it through. It just slides out. Then push the tab on the harness and disconnect it.

You can see the switch from 1AAuto is very similar. It will work the same, and fit the same as the original.

Reconnect the harness, and push your new switch back into place. Then just line up the lower clips. Push the vents down and underneath. Then line up the pins and just push them back into place. Then just put your vehicle into accessory and test out the switch. You can see it works. You're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.