Created on: 2013-10-10
Watch this video to learn how to remove and replace the interior door panel on your 01-04 Nissan Frontier.
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to remove the front driver's door panel on this 2003 Nissan Frontier. It's pretty much the same for the passenger side front as well. All you'll need is a small flat blade screwdriver, as well as a Phillips head screwdriver.
Locate the Phillips head screw in the door handle, as well as down there in the door grab, as well as the plastic clip up in the corner. I'm using a small flat blade screwdriver to pry that little clip off, and then I'm going to use a Phillips head screwdriver to remove those two screws. Fast forward as I do that. Lift off the rear of the armrest and you'll expose another Phillips head screw right there. I'll go ahead and fast forward as I remove that. Now remove the portion of the armrest with the switch pack assembly in it. Pull it up and you'll notice two connectors and they're removed by pressing the tab in on them and pulling them out. Go ahead and do that. Notice this exposes another Phillips head screw and I'll go ahead and fast forward as I remove that. The panel's now just being held on by the plastic clips that are right behind that. If you give a good tug it will come right off. Lift it and put it out of the way.
Going back on with the door panel you'll notice the clips and they're going to be going into the holes that correspond into the door. First we're going to want to pull the wires through the door panel where they go. Then we're going to hang the top of the door panel onto the door and make sure that the plastic clips line up with the holes. Then, once we know that that's all set, we can give it a couple taps around the perimeter of the door panel to seat those clips. Start to reinstall your Phillips head screws right there in the inner door handle and then the two that were hidden by the armrest. And then the one in the door grab handle, as well as the clip that goes up in the triangular piece that covers the mounting screws for the mirror. I'll go ahead and fast forward as I do that. Now you can take your door handle there and switch pack assembly and reinstall the connectors to it. Then place it down inside of the door there, starting with the backside and then working your way to the front. By pushing it down, you'll see the clips clip in and then, you can go ahead with the back portion of the armrest. Slide that in and then down in the back. Then when that's all set you can then reinstall the final Phillips head screw.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
This video is an overview of the essential skills and knowledge you will need to replace struts on any vehicle, especially yours!