How to Replace Front Lower Control Arm 2008-14 Cadillac CTS
Created on: 2019-09-30
Control arms are a crucial part of the suspension system of your vehicle. They carry the load of the vehicle to the wheel and maintain its alignment. Control arms are large and strong. They contain rubber bushings for smoother rides at the cost of eventual wear, as well as integral ball joints that also wear. How to install a new quality TRQ lower control arm in your 08-14 Cadillac CTS. The procedure is the same on either side of the vehicle.
Tools needed
-
24mm Socket
Torque Wrench
Hammer
18mm Wrench
Pry Bar
Block of Wood
21mm Socket
Pickle Fork
21mm wrench
Rubber Mallet
6mm Hex Socket
Center Punch
Anti-Seize Grease
Ratchet
Floor Jack
1/2 Inch Breaker Bar
1/2 Inch Impact Gun
22mm Socket
Marker / Writing Utensil
Shop Products
Cadillac CTS Front 8 Piece Steering & Suspension Kit TRQ PSA38863
Part Details:
- (2) Front Sway Bar Links
- (2) Front Lower Control Arms with Ball Joints
- 8 Piece
- (2) Front Outer Tie Rods
- (2) Front Inner Tie Rods
How To Replace Rear Rearward Control Arm 2007-16 GMC Acadia
This video shows you how to install a new rear rearward control arm on your 2007-16 GMC Acadia.
