How to Replace Front Window Regulator 2000-06 Chevy Suburban
Created on: 2014-04-29
Watch this video to learn how to fix a slow or stuck window. The experts at 1A Auto will show you how to replace the window regulator in your 00-02 Chevy Suburban or Tahoe.
-
step 1 :Removing the Door Panel
- Pry up the window switch panel by hand
- Disconnect the window switch wiring harnesses
- Remove the bolts from the door pull
- Remove the bolt at the bottom of the door panel
- Pry off the mirror base trim piece by hand
- Pry off the door handle trim piece with a flat blade screwdriver
- Lift the door panel up and off
- Pry off the courtesy light with a flat blade screwdriver
- Disconnect the wiring harnesses from the door panel
- Disconnect the door latch rod with a flat blade screwdriver
- Remove the bolt from the door handle
- Slide the door handle off
- Carefully peel off the water shield
-
step 2 :Removing the Window Regulator
- Disconnect the window motor lead
- Loosen the two bolts that hold the window to the regulator
- Hold the window in place with painter's tape
- Remove the bolts from the regulator
- Pull the window regulator out through the door
-
step 3 :Installing the Window Regulator
- Insert one of the bolts into the window regulator
- Push the regulator into the door
- Hang the regulator by its bolt
- Insert the bolts into the regulator
- Connect the window motor lead
- Connect the window switch wiring harness
- Raise the window with the switch
- Disconnect the window switch wiring harness
- Remove the painter's tape from the window
- Lower the window onto the regulator
- Insert the two bolts that hold the window to the regulator
-
step 4 :Reinstalling the Door Panel
- Put the water shield into place
- Connect the latch rod to the door handle
- Slide the door handle on
- Insert the bolt into the door handle
- Connect the wiring harnesses to the door panel
- Push the courtesy light into place
- Lift the door panel into place
- Push in the door panel clips
- Push the switches into the door
- Insert the bolts into the door pull
- Insert the bolt at the bottom of the door panel
- Slide on the door handle trim piece
- Push on the mirror base trim piece
- Connect the window switch wiring harnesses
- Push in the window switch panel
Tools needed
-
Flat Blade Screwdriver
8mm Socket
Painter's Tape
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
Thanks for tuning in. We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
Chevrolet GMC Cadillac Front Driver Side Power Power Window Motor & Regulator Assembly ACDelco 20945138
Part Details:
- Power
How to Replace Front Window Regulator 1997-2005 Chevy Venture
Check out this video and learn how to replace the front window regulator on your 97-05 Chevy Venture or Pontiac Montana.
