How to Replace Grille Emblem 2007-13 Chevy Silverado

1. step 1 :Removing the Emblem 0:37

   • Pull the lever near the footrest and push the lever under the hood toward the driver's side to raise the hood
   • Use a trim tool to remove the eight push pins from the grille cover
   • Remove the cover
   • Use a 10mm socket and ratchet to remove the four 10mm bolts from the top of the grille (if any of the bolts on your truck have rusted, you can soak them in rust penetrant to make removing them easier)
   • Use needle nose pliers to remove the six clips from the inside of the grille
   • Use needle nose pliers or a screwdriver to bend the clips on the back of the grille and then push on the four tabs surrounding the clips and remove the emblem

2. step 2 :Replacing the Emblem 3:23

   • Line up the tabs on the back of the emblem with the tab holes on the front of the grille
   • Press the emblem into place
   • Line up the clips on the back of the grille with the clip holes on the front of the truck
   • Push the grille into place
   • Use a 10mm socket to reinsert the four bolts in the top of the grille
   • Line up the grille cover and reinsert the eight push pins

Tools needed

• Flat Blade Screwdriver

  Rust Penetrant

  10mm Socket

  Ratchet

  Needle nose pliers

  Trim Tool Set