How to Replace Headlight Switch 2013 Ford F250
Created on: 2017-04-19
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted headlight switch on 13 Ford F250
-
step 1 :Removing the Headlight Switch
- Pry out the knee panel
- Remove the 7mm screw on the left side of the instrument panel bezel
- Pop out the upper bezel
- Pry out the dash panel trim with the switch
- Disconnect the electrical connector
- Press the tabs on the switch
- Remove the switch
-
step 2 :Installing the Headlight Switch
- Press the switch into the dash panel
- Connect the electrical connector
- Slide the dash panel into place
- Press on the instrument panel bezel
- Tighten the 7mm screw
- Reinstall the knee panel
Tools needed
-
7mm Socket
Ratchet
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video we're going to be working with our 2013 Ford F250 Super Duty. We're going to show you how to remove and replace your vehicle's headlight switch.
If you like this video, please click subscribe. We have a ton more information on this and many other vehicles. If you need this part for your truck, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair.
Remove the knee panel of the truck by getting your fingers behind it and pulling straight out towards you. Then remove the 7mm screw and the left side of the bezel around the instrument panel. We'll then pop that panel we removed the screw from forward. You don't need to remove this completely. Then grab this piece of trim where our headlight bezel is and pull straight out. You can sneak it out from under that dash panel. We'll push down on the tab and remove the electrical connector. Then there are three prongs around it that you'll need to push down to remove it from the bezel. Remove the switch.
Install your new switch into the panel by lining it up and snapping it back in. Turn that off. Slide the panel back in and snap all of your retainers back into place as well as the retainers on the side panel. Reinstall the 7mm screw. Reinstall the knee panel and you're good to go.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Shop Products
How to Replace Headlight Switch 2000-05 Chevy Monte Carlo
With this video you can learn how to replace the headlight switch on your 00-05 Chevy Monte Carlo. 1AAuto shows you how!
