How to Replace Heater Blower Motor with Fan Cage 1995-96 Chevy Tahoe
Created on: 2014-03-14
This video will explain how to access the blower motor and replace it with a brand new one from 1aauto.com
-
step 1 :Removing the Blower Motor
- Open the glove box, push in the sides, and pull it down
- Push the tab and disconnect the resistor harnesses with a flat blade screwdriver
- Remove the blower motor cover down and out
- Remove the three 7mm bolts from the blower motor
- Remove the ground screw from the blower motor with a Phillips bit
- Pull the blower motor down and out
-
step 2 :Installing the New Blower Motor
- Insert the blower motor into its slot
- Align the tab and turn the blower motor clockwise
- Line up the blower motor and replace the three 7mm bolts
- Replace the ground screw with the Phillips bit
- Replace the blower motor cover
- Reconnect the resistor harnesses
- Insert the hooks on the glove box onto the bars and push it into place
Tools needed
-
Flat Blade Screwdriver
Phillips Bit in a Ratchet
7mm Socket
Ratchet
Needle nose pliers
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the blower motor on this 1996 Chevy Tahoe. The items you'll need include a new blower motor from 1AAuto.com, a flat blade screwdriver, 7mm socket and ratchet, Phillips bit, and pliers. Start off by opening your glove box, pushing in the sides, and pulling it down. Then unhook it and pull.
Next, you want to disconnect these two harnesses right here. So, using a pair of pliers, just push the tabs and pull them free. Next, you want to remove this cover, so pull the back flap up over the tab, and pull the cover down and out. Surrounding your blower motor, there's a series of 7mm bolts. You want to just go ahead and remove these and we'll fast-forward as Don does that.
Next, you want to remove this ground screw using a Phillip's bit. Just reach in there and remove it. Now, pull your blower motor free, and just pull it down and out. On the left is the old blower motor; on the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same.
Push your new blower motor into place and line it up. Once you have it lined up, replace those 7mm bolts. Now, just replace that ground screw. You can see he starts off by just twisting it in by hand, and then tightens it up with his Phillips bit and ratchet. Now, replace that cover. Once it's pushed into place, reconnect those two harnesses. Now, take your glove box, put these two hooks onto these two bars, push in the sides, push it back into place, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Blower Motor 1997-2005 Chevy Venture
Check out this video on how to repair, install, fix, change or replace a broken, weak, noisy or screeching heater and air conditioning fan blower motor
