How to Replace Ignition Coil 2000-06 Chevy Suburban
Created on: 2014-04-25
Use this video in order to help you remove, install, repair, or replace your broken, misfiring or damaged ignition coil on your 00-06 Chevy Suburban.
-
step 1 :Removing the Ignition Coil
- Disconnect the ignition coil wiring harness
- Remove the 10mm bolt from the hose bracket
- Pull off the hose bracket
- Disconnect the spark plug wire from the ignition coil
- Remove the two 10mm bolts from the ignition coil
- Pull the ignition coil up and out
-
step 2 :Installing the New Ignition Coil
- Push the new ignition coil into place
- Insert the two 10mm bolts into the ignition coil
- Connect the spark plug wire to the ignition coil
- Push the hose bracket into place
- Insert the 10mm bolt into the hose bracket
- Connect the ignition coil wiring harness
Tools needed
-
Socket Extensions
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an ignition coil on this 2002 Chevy Suburban with the 5.3 liter, V8 engine. It's the same part and similar process on these Suburbans from 2000 to 2006. The items you'll need for this are a new ignition coil from 1AAuto.com and a 10mm socket and ratchet with an extension.
Your ignition coils are located right here. There are four on each side since this is a V8 engine. To remove these ignition coils, it's the same process for each of them; they're held in with two 10mm bolts. The only difference is this one right here that has a bracket for these hoses over it and that bracket also just held in with a 10mm bolt. We'll show you on this one since it's a slightly different procedure. Just lift up on the tab and disconnect that harness, and then, using a 10mm socket and ratchet, just remove that 10mm bolt, right there. Now you can just pull that bracket aside, and then, pull your spark plug wire from the ignition coil. Then remove the 10mm bolt at the top and the bottom of the coil. The coil will pull right off.
On the left, is the old ignition coil; on the right, is the new one from 1A Auto. You can see they're identical and they're going to fit exactly the same. Take your new ignition coil and push it down into place and then replace those two 10mm bolts. We'll fast forward as Don does this. Now reconnect your spark plug wire and then push this bracket back into place and replace that 10mm bolt. If you're replacing multiple ignition coils, obviousl,y you just repeat the process for each one and finally just reconnect the harness and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
Chevrolet GMC Cadillac Hummer 17 Piece Ignition Kit TRQ Performance TKA06289
Part Details:
- (8) Spark Plugs
- 17 Piece
- Iridium
- (1) Ignition Coil Set
- (1) Performance Spark Plug Wire Set
How to Replace Ignition Coils 1998-2012 Ford Crown Victoria
Watch this video to learn how to install ignition coils on your 1998-2012 Ford Crown Victoria.
