How To Replace Instrument Panel Bulbs 2000-06 Chevy Suburban
Created on: 2014-04-28
Watch this video to learn how to fix burnt out dashboard lights. The experts at 1A Auto show you how to replace the instrument panel light bulbs on your 00-06 Chevy Suburban or Tahoe.
-
step 1 :Removing the Instrument Cluster
- Lower the steering wheel and the shifter
- Pry out the dash panel by hand
- Remove the four 7mm bolts from the instrument cluster
- Disconnect the instrument cluster wiring harness
- Tilt the cluster back and lift it out
-
step 2 :Servicing the Instrument Cluster Light Bulbs
- Pry out the instrument cluster backing panel tabs with a flat blade screwdriver
- Twist the bulbs out of the instrument cluster, using pliers if necessary
- Twist the bulbs into the instrument cluster
- Push on the instrument cluster backing panel
-
step 3 :Installing the Instrument Cluster
- Connect the instrument cluster wiring harness
- Push the instrument cluster into place
- Insert the four 7mm bolts into the instrument cluster
- Push on the dash panel
- Raise the steering wheel and the shifter
Tools needed
-
7mm Socket
Ratchet
Needle nose pliers
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove, and replace, as wells as service the bulbs on the instrument cluster on this 2002 Chevy Suburban. The only tool you'll need for this is a 7 millimeter socket and ratchet, and for some of the smaller bulbs, you may need a pair of pliers.
To start off, we need to remove the dash panel. Just make sure your steering wheel is horizontal. Pull down your shifter all the way down. Then just pull out on this panel. You want to slide it forward and up and over the steering wheel.
You want to remove these four 7 millimeter bolts. There's one in each corner on your instrument cluster. We'll just fast forward as Don removes all four of those. Now, tilt the cluster back, and then pull it up and out. Now you want to just push this tab on the harness and pull the harness free.
Now to access the bulbs, you want to use a flat blade screwdriver to pry out on these tabs. You can see these are the sockets right here. For the larger ones, you can just twist them counter clockwise, pull them out, and twist your new one in clockwise to lock it. For the small ones, they can be in there a bit harder so use the pliers to twist them out, and the same procedure. When you're done, just push this cover back into place.
Tilt your instrument cluster back down, reconnect the harness, and then slide that back into place. Once you've got it lined up and pushed back into place, just replace those four 7 millimeter bolts. Take your dash panel and put it up over the steering wheel and then tuck it down behind that steering column. Line up the panel and push it back into place. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Front Door Air Bag 1997-2006 BMW 325Xi
Watch this video to learn how you can replace the front door air bag on your 97-06 BMW 325 Xi and similar 3 Series models.
