Created on: 2010-09-03
Check out this video to learn how to replace the interior door handle on your 94-97 Honda Accord. 1A Auto makes it easy with step by step instructions!
Flat Blade Screwdriver
Phillips Head Screwdriver
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the Internet. Hi I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years' experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video we'll be removing and replacing the front door handle, inside door handle. All you need is a Phillips screwdriver and maybe a regular screwdriver. A pretty simple operation. You need a Phillips screwdriver and usually there's a little door here that you might have to use a small regular screwdriver and flip open to remove this Phillips screw right here. Keep track of it and then you slide the handle forward and out. Okay, if yours is broken, usually they're broken at the rod here and that will come right out. Otherwise you want to pull out and then there's a little clip here. You can either use your thumb or just even your Phillips screwdriver. Just push that clip off the rod and the rod flips up and out. Then your power door locks, if you have power door locks you just press down on this little tab here and unhooks.
Here's your old handle and like I said most of the time they break right on this part right here. You also want to make sure that if your handle did break you fix what's the problem inside the door. Sometimes there's a sticky latch or something in the door that causes it to break, but here's the new handle from 1A Auto. You can see it's going to go in there all the same. It is a little bit different gray, but actually the gray matches the gray in the car a little better, so we'll go ahead and install it. First of all we'll hook the switch back up. You can test that. This is a little bit bigger and push it down and flip the clip over it and then slide the handle back in. Then put your screw in and I'm holding this door off to the side a little bit, it's snug. Put the trim on and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We're the company that's with you on the Internet and in person.
How to repair, install, fix, change or replace a broken or snapped off interior door handle on Chrysler Sebring, years 01, 02, 03, 04, 05, and 06.