How to Replace Mass Air Flow Sensor 2007-11 Honda CR-V
Created on: 2018-07-19
How to remove, install, fix, change or replace a broken Mass Airflow Sensor / Meter on 09 Honda CR-V
-
step 1 :Removing the Mass Air Flow (MAF) Sensor
- Disconnect the MAF sensor
- Remove the two Phillips screws from the sensor
- Remove the sensor
-
step 2 :Installing the MAF Sensor
- Insert the MAF sensor into place
- Tighten the Phillips screws to the sensor
- Connect the MAF sensor
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
I'm going to replace the mass air flow sensor. What you're going to do is push down on the connector right here, pull it out just like that, and we'll take a Phillips head screwdriver. Sometimes these screws might be kind of tight. I'll loosen that one up, and then I'll loosen this one up. Unscrew these screws. Make sure you don't drop them. Once those are out, you can grab the mass air flow sensor, pull it straight up, and there's the mass air flow sensor.
You're going to reinstall. Just take it and line it up. Push it down. Install this screw here. I'll install this screw right here, and I'll snug those down, and reconnect the connector. Lock it in.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Car or Truck Making a Howling Noise Replace Your Wheel Bearing and Avoid Installation Mistakes
Andy gives you some tips on how to best replace a pressed in wheel bearing, especially if you don't have a bunch of special bearing tools!
