How To Replace Mass Air Flow Sensor 2009-12 Chevy Silverado

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.

In this video, we're going to show you how to replace the mass airflow sensor on this 2011Chevy Silverado 1500. The only tool you'll need is a T15 bit and a ratchet or a T15 driver would also work.

Your mass airflow sensor is right here on this air intake hose. You just want to push the tab on the bottom of that connector and pull it free, and then remove the two T15 screws on either side of the airflow sensor. Once removed, the sensor just lifts right up and out.

Now you just push your new airflow sensor down into place, and you replace those two T15 screws. Reconnect the harness to the mass airflow sensor, and you're all set.

We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.