How To Replace Master Power Window Switch 2007-13 Chevy Silverado
Created on: 2013-09-30
Learn the steps behind replacing the door power window switch on your 07-13 Chevy Silverado or similar GM truck.
-
step 1 :Removing the Switch Panel
- Pry off the pull handle trim with a flat blade screwdriver
- Remove the two 10mm bolts in the door pull
- Pry up the switch panel by hand with a flat blade screwdriver
- Disconnect the wiring harnesses
-
step 2 :Removing the Switch
- Pry out the tabs around the switches with a flat blade screwdriver
- Pull the switch up by hand
-
step 3 :Installing the Switch
- Push in the new switch until it clips
-
step 4 :Reinstalling the Switch Panel
- Connect the wiring harnesses
- Push the switch panel into the door
- Insert the two 10mm bolts into the pull handle
- Push on the pull handle trim piece
Tools needed
-
Flat Blade Screwdriver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the switch panel on this 2011 Chevy Silverado 1500. It's the same process on a large variety of GM trucks and SUVs from 2008 to 2012. The tools you'll need include a flat blade screwdriver and a 10mm socket and ratchet.
Using a flat blade screwdriver, you just want to pry off this pull handle trim panel. Now you have access to these two 10mm bolts, you just want to go ahead and remove those. You want to pry up that switch panel and just disconnect these harnesses. Just push in the tab on the top and pull back on them. For this lead, there's a tab on the back of it. You just want to pry out that tab, and then the clip will actually pull up and out.
To remove the switches from this panel, there's four tabs around the switches, and you want to just pry out those tabs with a flat blade screwdriver, and that will release it.
Old part's on the right, with the new part from 1A Auto on the left. You can see they're identical, and they'll fit in exactly the same. Push your new set of switches down into the panel. You just want to reconnect those harnesses.
Then you just want to make sure your harnesses are pushed in there, and push the switch panel right down. Then we'll fast-forward as he puts that pull handle back into place, replaces the two 10mm bolts and the trim panel.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Power Window Switch 2000-05 Chevy Monte Carlo
How to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch on 00, 01, 02, 03, 04, 05, Chevy Monte Carlo.
