How to Replace Parking Lights 2000-06 GMC Yukon

Take these two pins out, twist this forward, and then slide them out. Just grab the light assembly and disconnect the connectors right here and right here. Now we can access this retainer right here. Just take a screwdriver, push down on this clip, and you can slide the light out this way. Disconnect the connector right here. Just twist it to the side and the whole socket will come out. Push down on this pin, twist it, same with this one, and pull it right out. All right. Take the socket and just line it up. It's always a good idea to replace the bulbs at this time. Lock them in place. Do the same on this one. Lock it in place. And the same for this one. And lock that in place. Now you want to slide these tabs over here just like that. Once that's lined up, can get this lined up into here. Just use a little bit of pressure. There we go, and just push back, lock it in. And connect these connectors. And line this up, make sure you push the wires back. That's lined up. Take the pins. Before I lock that down, make sure this pin goes in. I'm gonna have to adjust it a little bit. Might have to loosen them up to get them to line up. And there you go, lock them in place.