Created on: 2014-01-02
Watch this video to see how you can replace the parking/turn signal light on your 05-07 Jeep Liberty.
T15 Torx Driver
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the parking lights on this 2006 Jeep Liberty. It's the same process on these Liberties from 2005 to 2007. You'll need new parking lights from 1AAuto.com, a T15 Torx bit and ratchet, and a flat blade screwdriver.
Right here, there is one T15 bulb. Just go ahead and remove that. I'll fast-forward as Don does this. Once it's removed, pull it out and pull the tab out of the slot on the side. To disconnect it, pry up the red clip. Push on the tab on the other side and pull the harness free.
On the right is the old parking light; on the left is the new one from 1A Auto. You can see they're identical, and will mount exactly the same. The new one obviously looks a lot better. Connect your harness to your new parking light and push that red tab in. Then, align the tab on the side into that slot. Push your parking light into place and replace that T15 bolt. I'll fast-forward as Don does this. Once that's tightened up, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Check out this video to learn how to replace the corner light on your 98-00 Volvo C70, S70 or V70!