How to Replace Power Door Lock Switch 2007-13 Chevy Silverado 1500
Created on: 2013-10-03
Watch this video to learn how to replace the door lock switch on your 07-11 GMC Sierra. 1A Auto will show you the steps!
-
step 1 :Removing the Door Lock Switch
- Pry off the door pull trim panel with a flat blade screwdriver
- Remove the two 10mm bolts from the door pull
- Pull off the door pull
- Pry off the window switch panel with a flat blade screwdriver
- Disconnect the window switch wiring harnesses
- Pull off the window switch panel
- Push the door lock switch out of the switch panel
-
step 2 :Installing the Door Lock Switch
- Push the door lock switch into place
- Connect the window switch wiring harnesses
- Push the window switch panel into place
- Put the door pull into place
- Insert the two 10mm bolts into the door pull
- Push on the door pull trim panel
Tools needed
-
Flat Blade Screwdriver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the power door lock switch on this 2011 Silverado 1500. This is the LT model. The LTZ model will be a little bit different. The only tools you'll need are a 10mm socket and ratchet and a flat blade screwdriver. We're going to show you the driver side; passenger side's generally the same. It's also the same for GMC Sierra SLE.
Using a flat blade screwdriver, you just want to pry off this pull handle trim panel. Now you have access to these two 10mm bolts. You just want to go ahead and remove those. You want to pry up that switch panel and just disconnect these harnesses. Just push in the tab on the top and pull back on them. For this lead there's a tab on the back of it. You just want to pry out the tab, and then the clip will actually pull up and out. While pushing on the button side of the switch, pry the tabs that hold the switch into the bezel, and as you push and pry, the switch will pop up and out.
You can see the old one on the bottom and the new one on the top from 1A Auto. They're exactly the same and will fit the same. Take the new door lock switch and just push it into place on the switch panel. You just want to reconnect those harnesses. Then you just want to make sure your harnesses are pushed in there and push the switch panel right down. Then we'll fast foward as he puts that pull handle back into place, replaces the two 10mm bolts, and the trim panel.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Power Door Lock Switch 2005-10 Volkswagen Jetta
Check out this video on how to replace the power door lock switch on your 05-10 Volkswagen Jetta.
