How To Replace Rear Air Shocks 2000-14 Chevy Suburban
Created on: 2014-06-04
This video demonstrates how to remove the rear air shock if it's broken or weak or if the vehicle is sagging. The 1A experts will reveal the steps needed
-
step 1 :Removing the Air Shock
- Raise and secure the vehicle
- Disconnect the wiring harness from the air shock
- Unclip the air hose from the air shock
- Pull the hose off the air shock
- Reset the air hose clip
- Hold the bottom air shock bolt with a 21mm wrench
- Remove the bottom 21mm from the air shock
- Hold the top air shock bolt with a 21mm wrench
- Remove the top 21mm nut from the air shock
- Raise the wheel with a floor jack
- Pull the bolts out of the air shock
- Pull out the air shock
-
step 2 :Installing the New Air Shock
- Put the new air shock into place
- Insert the top 21mm bolt
- Insert the bottom 21mm bolt
- Fasten the 21mm nuts onto the bolts
- Connect the wiring harness to the new air shock
- Connect the air hose to the air shock
- Lower the vehicle to the ground
Tools needed
-
21mm wrench
Socket Extensions
Pry Bar
Jack Stands
Ratchet
Floor Jack
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and, please, next time you need parts for your vehicle, think of 1AAuto.com.
In this video, we're going to show you how to replace the air shocks on this 2002 Chevy Suburban. It's the same part and similar process on these Suburbans with the air shocks from 2000 to 2013. The items you'll need for this are new air shocks from 1AAuto.com, 21mm socket and ratchet with an extension, 21mm wrench, pry bar, and jack and jack stands.
Start off by disconnecting this harness. Just pull up the tab and pull it free. For the air hose, you want to pull down on this clip and then pull the hose free. Then, push the clip back in to reset it. Now you want to remove this 21mm nut and this 21mm nut. Using a ratchet and a wrench, remove those and we'll fast forward as Mike does this. Jack up the wheel unless your vehicle is on the ground then you'll be all set and then pull those two bolts out. You can pull your suspension forward and out.
On the bottom is the old air shock. Above it is the new one from 1A Auto. You can see they're identical and will fit exactly the same. Put your new air shock up into place and replace that top bolt first, and then, push the lower one into place and replace those bolts and the 21mm nuts. Push your harness into place and then push your air hose into place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
Chevrolet GMC Cadillac Rear 3 Piece Air Suspension Kit Arnott ARSFK00015
Part Details:
- (1) Air Suspension Compressor
- (2) Rear Electronic Conversion Air Shocks
- 3 Piece
How to Install Air Suspension Pump with Bracket 2007-13 Chevy Suburban
How to replace the air ride suspension compressor on 09 Chevy Suburban.
